500efi-575sci
#1
Charter Member
Charter Member
Thread Starter
500efi-575sci
Does anyone have oem specs on both? Mercury Racing no longer has them on their website. Do they have the same rods, block and heads but different pistons, cam, lifters and accesories?
__________________
AUTOCONNECTIONLLC.COM
AUTOCONNECTIONLLC.COM
#2
VIP Member
VIP Member
500 EFI's have 8.75:1 compression and hyd roller cams,
575's have 7.5:1 compression and flat tappet hyd cams.
575's have manley H-beam rods, as I recall, the first
500EFI's had GM rods, the later used Manleys
Both have GM rec port heads.
The 500 EFI is MPI...The 575 is TBI
Hope that helps
575's have 7.5:1 compression and flat tappet hyd cams.
575's have manley H-beam rods, as I recall, the first
500EFI's had GM rods, the later used Manleys
Both have GM rec port heads.
The 500 EFI is MPI...The 575 is TBI
Hope that helps
#3
Charter Member
Charter Member
Thread Starter
Thanks, that helps a little. A freind of mine here has a shop and his personal boat is a 2003 w/ 500efi's, he had to go into one and said it had the h-beams with mercury racing in the side. He said he has also pulled apart 575sci's from a customers 42 Lighning and they had standard rod like a 502efi/mpi. Just trying to set the record straight. I am looking at buying a 2003 36 Spectre w/ 575sci's and wanted to know for sure.
__________________
AUTOCONNECTIONLLC.COM
AUTOCONNECTIONLLC.COM
#4
VIP Member
VIP Member
Check these conn. rod part #'s out
this is from the first s/n batch of 500EFI's
http://www.mercruiserparts.com/Show_...iston+Assembly
( part # 614-9641t)
this is the next batch.....the rest of the production shows this
# also
http://www.mercruiserparts.com/Show_...ler+Components
( part # 614-8m8020323)
This is a 575
http://www.mercruiserparts.com/Show_...ler+Components
It uses the same part # rod throughout the production run,
and is the same part # as what the 500EFI's used after
the first batch
( part # 614-8m8020323)
The 614-9641t is the same part # used in HP500's
which used GM rods
Go for it......575's are a great engine....you
wont be dissapointed.
this is from the first s/n batch of 500EFI's
http://www.mercruiserparts.com/Show_...iston+Assembly
( part # 614-9641t)
this is the next batch.....the rest of the production shows this
# also
http://www.mercruiserparts.com/Show_...ler+Components
( part # 614-8m8020323)
This is a 575
http://www.mercruiserparts.com/Show_...ler+Components
It uses the same part # rod throughout the production run,
and is the same part # as what the 500EFI's used after
the first batch
( part # 614-8m8020323)
The 614-9641t is the same part # used in HP500's
which used GM rods
Go for it......575's are a great engine....you
wont be dissapointed.
Last edited by JaayTeee; 07-31-2008 at 12:20 PM.
#5
Charter Member
Charter Member
Thread Starter
Thanks JaayTeee! Never crossed my mind to check Bam's site.
__________________
AUTOCONNECTIONLLC.COM
AUTOCONNECTIONLLC.COM