Raylar 496 upgrade
08-23-2008, 12:46 PM
#1
Registered
Thread Starter
Join Date: May 2007
Location: Linwood, Saginaw Bay
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Raylar 496 upgrade
What's the Raylar kit price to upgrade 496's?
The website says call... that usually means there is some poetic license in the equation.
So, of those of you who did it, what was the final cost per engine?
Thanks
Carder
The website says call... that usually means there is some poetic license in the equation.
So, of those of you who did it, what was the final cost per engine?
Thanks
Carder
08-23-2008, 04:12 PM
#3
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 7 Likes
on
7 Posts
The Price is Right
Raylar BCK103 kits complete are currently priced at $7130 plus UPS shipping and handling. Just so inquiring minds don't have to guess or make a toll free phone call!! We currently have 19 kits boxed and ready to ship, so call and keep those orders coming!
Best Regards,
Ray @ Raylar
Best Regards,
Ray @ Raylar
08-23-2008, 09:51 PM
#5
Registered
Bob at Full Throttle Marine has done a couple I think....
Here is a link to an article he's written about it....
http://www.fullthrottlemarine.com/49...%20Article.htm
Doug
Here is a link to an article he's written about it....
http://www.fullthrottlemarine.com/49...%20Article.htm
Doug
Last edited by Boatally Insane; 08-23-2008 at 09:56 PM.
08-24-2008, 12:19 AM
#6
Registered
Platinum Member
I'd love to see what this kit would pull on the dyno without the computer remap and stock 5000 rpm rev limit. Not everybody wants to spin their motor at 5400 rpm.....my .02.
Thanx,
Thanx,
08-24-2008, 01:04 PM
#8
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 7 Likes
on
7 Posts
Verbi69:
Many OSO'ers have independantly dyno'd the Raylar BCK103 kit on a stock 496HO with stock program and stock exhaust. It will make between 521 and 530HP every time like clockwork.
As for how many we have sold, last serial number puts us in the 500 range. Considering there are still about 25,000 or so 496's out there without the kit, we still have a long way to Go!
Best Regards,
Ray @ Raylar
Many OSO'ers have independantly dyno'd the Raylar BCK103 kit on a stock 496HO with stock program and stock exhaust. It will make between 521 and 530HP every time like clockwork.
As for how many we have sold, last serial number puts us in the 500 range. Considering there are still about 25,000 or so 496's out there without the kit, we still have a long way to Go!
Best Regards,
Ray @ Raylar
08-24-2008, 05:59 PM
#9
Charter Member #1055/Moderator
Charter Member
Thats a lot of units! Good job! I haven't heard anything negative. How much HP with cmi's and new ecm calibration?
Thanks for the info Ray.
Thanks for the info Ray.
__________________
[img][/img]
[img][/img]
Thread
Thread Starter
Forum
Replies
Last Post
pachanga
General Boating Discussion
16
10-13-2008 01:40 PM
