H2X BOSS

Cruising across the lake, I lost all power. When trying to restart, I noticed there is no beep as there usually is when the ignition is turned. The starter will still go, just no ignition. Sounds like an electrical gremlin!

Its a 2000 454 Mag MPI, any suggestions of where to start?

Thanks in advance!

RYAN JOHANSEN

satisfactionII

I have had that problem before. Frustrating it is. I found my problem with a loose connection on the alternator gauge. No beeeep, no start.

MnFastBoat

kill switch??
Some are set up that way, will allow you to turn over but no spark??

WHOSNEXT

thats what happend to mine...broken wire behind switch.

Jupiter Sunsation

I recently had a starter installed with the same problem/ no power/ no beep. Turns out the ground wire was loose (interpret: probably not hooked up).

Biligemouth

Loose wire somewhere. Buddy had oneon a Baja junk going to a fuse block work loose...exact same symptom as you.

eliminatethis

been there done that check first