stock Merc 502 efi cam , do i need different dist gear?
#1
Registered
Thread Starter
stock Merc 502 efi cam , do i need different dist gear?
I am using stock Merc Tbolt dist of my 454 gen5 on my new 502 gen6 with roller cam,
doI need a different gear on the dist or not?
doI need a different gear on the dist or not?
#3
Charter Member # 55
Charter Member
It actually depends on the cam gear.
Most people use a pressed on steel gear so you can run a stock steel dist gear. If its all billet, then you need to run a bronze or composite gear.
Most people use a pressed on steel gear so you can run a stock steel dist gear. If its all billet, then you need to run a bronze or composite gear.