mechanical advance for my slow boat
09-25-2008, 11:44 AM
#1
Registered
Thread Starter
Join Date: Jun 2006
Location: Lady Lake, FL
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
mechanical advance for my slow boat
I'm trying to find the total mechanical advance of my (partybarge 
)'87 bayliner 2450 with OMC 305 original single point ignition.
I'm only showing 6 degrees total. That seems too low.
Can anyone help me out?
)'87 bayliner 2450 with OMC 305 original single point ignition.I'm only showing 6 degrees total. That seems too low.
Can anyone help me out?
09-25-2008, 11:48 AM
#2
Registered
You right. It's way too low. You should be around 16-20. I'm thinking the small blocks had 20 degrees.
Darrell.
09-25-2008, 07:30 PM
#3
Registered
Probably rusted together underneath the distributor, I had points it was under there, had a Sea Ray 240 SRV that did that to me. 12 degrees at idle and 12 degrees top end.
09-26-2008, 07:02 AM
#4
Registered
Thread Starter
Join Date: Jun 2006
Location: Lady Lake, FL
Posts: 429
Likes: 0
Received 0 Likes
on
0 Posts
had the point plate out and everything was loose and was free to both ends of the stops also no rust
Thread
Thread Starter
Forum
Replies
Last Post
rob 221 lib man
Fiberglass and Paint
7
08-09-2007 10:43 PM
GregP
General Boating Discussion
10
07-08-2005 07:05 AM
