871 questions
#1
Registered
Platinum Member
Thread Starter
871 questions
Anyone running double strip teflon, white and black, on their boat? I've got an 871 mooneyham that was rebuilt by littlefield. It's been sitting on a shelf for a couple years and I was thinking about finally doin something with it. Just wasn't sure if it's going to create too much heat in a marine app.
Thanks guys..
Thanks guys..
#2
Charter Member #94
Charter Member
A. run it rich!
B. If you are running stock GM heads
Make sure you have the best valves, (especially the exhaust). and if the valves have much time on them, replace them regardless of condition.
C. run it rich
B. If you are running stock GM heads
Make sure you have the best valves, (especially the exhaust). and if the valves have much time on them, replace them regardless of condition.
C. run it rich
__________________
Abby-someone
Abby-someone
#6
Charter Member #94
Charter Member
Just before I " checked out" for a while, I had just put together my 8-71/carbs/intercooler/linkage on the new Maschmeier 509cid. Had jets and a few sets of pulleys .
I was getting it ready to put into the boat when I realized I now have a clearance issue. I had just bought a new ProRam scoop to build a new hatch.After realizing just how tall this monster is, I'm wishing I would have looked closer into the Whipple.
I was getting it ready to put into the boat when I realized I now have a clearance issue. I had just bought a new ProRam scoop to build a new hatch.After realizing just how tall this monster is, I'm wishing I would have looked closer into the Whipple.
__________________
Abby-someone
Abby-someone
Last edited by Gordo; 10-03-2008 at 04:34 PM.
#7
Registered
Platinum Member
Thread Starter
Ya, they're tough to beat and would normally be my first choice. I've just had this blower kickin around forever with carbs, linkage, and intake but no pulleys. I traded it for some volvo diesel parts but now I don't know what to do with it. Maybe I'll stuff it on a small block and race DD
Thread
Thread Starter
Forum
Replies
Last Post
Red Stripe
General Q & A
7
05-28-2002 06:48 AM