Rocker arm geometry
10-04-2008, 09:15 AM
#1
Registered
Platinum MemberThread Starter
Join Date: Mar 2007
Location: Toms River, New Jersey
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Rocker arm geometry
Checking rocker arm geometry should the rocker roll acoss the top of the valve or shoud it stay in the center of the valve stem keeping it as norrow as possible?.
10-04-2008, 09:53 AM
#2
Off the Radar
Platinum Member
Join Date: May 2001
Location: Short Pump or Colonial Beach, VA
Posts: 1,097
Likes: 0
Received 1 Like
on
1 Post
Across the center of the stem.
Take a black sharpy and color the top. Turn over the motor a couple of times and remove the rocker. Should be a place in the center of the stem about 1/8" where the marker is removed.
Take a black sharpy and color the top. Turn over the motor a couple of times and remove the rocker. Should be a place in the center of the stem about 1/8" where the marker is removed.
