Help W/ Set-up
#1
Registered
Thread Starter
Join Date: Jun 2006
Location: Reno
Posts: 169
Likes: 0
Received 0 Likes
on
0 Posts
Help W/ Set-up
So I'm building a 540 blower motor and have been kicking around the idea of how all of this will or won't work together.
Closed cooling system.
I also have a Superchiller how does that get plummed? From the circulation pump to the Super Chiller then to the Oil cooler, then Exhaust?
Dry sump oil system and a Engine pre-lube system. How will these two work together and how are they normaly installed (what order)?
The Blower is a Vortech unit (5 PSI), and the engine has a custom EFI system.
Closed cooling system.
I also have a Superchiller how does that get plummed? From the circulation pump to the Super Chiller then to the Oil cooler, then Exhaust?
Dry sump oil system and a Engine pre-lube system. How will these two work together and how are they normaly installed (what order)?
The Blower is a Vortech unit (5 PSI), and the engine has a custom EFI system.
#2
Charter Member # 55
Charter Member
The chiller has to get plumbed from a separate water intake or by using a 2 stage sea pump. If you use a separate hull pick up, the pressure alone will be plenty to feed the chiller.
Thread
Thread Starter
Forum
Replies
Last Post
divenstar
General Boating Discussion
3
10-03-2008 07:48 AM