Msd - Yes Or No
#41
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
You know I just realized you were putting this into a BAJA. You need to measure your clearance on the front of the engine and make sure you have room for the blower pulley etc without cutting into the bulkheads. I am working with a guy right now who has a 27OL, and we couldn't even dream of fitting ANY blower int there without cuting into the back of the seat for clearance. We went the simple route and built a big inch rat motor and CMI's instead.
#42
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
#43
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
A 25 Outlaw should be fine. Outlawcowgirl put a 525SC in my old 24 Outlaw and they had to modify the back seat. I know the 25 OL has about 6 more inches of room in front of the engine.
#45
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
#46
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
MSD's popular 6M-2 with a built-in rev-limiter
Multiple sparks improve starting, throttle response and idle quality
Circuitry is potted for a weather-proof housing
Weathertight connectors protect wiring from water and chemicals
Multiple sparks improve starting, throttle response and idle quality
Circuitry is potted for a weather-proof housing
Weathertight connectors protect wiring from water and chemicals
#47
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I did end up going with the msd stuff after talking with erick at the blower shop. This is the ignition i got.
#48
Registered
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
i have the same msd on my 32 thunder since 2000 no problems. better idle , starts like a efi motor and only changed plugs once 3 years ago. i do carry 1 spare on the boat. and with the rev limiter i turn my 500 hps 5500.00 rpms
#49
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
#50
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
![Default](/forums/images/icons/icon1.gif)
I bring sp are everything I can change without pulling the motor.. You never know,I never change plugs because they fail just because.