Fountain/Whipple question
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: McHenry, IL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Does anyone have experience with a 502 MPI/27' Fountain/Whipple application? What is the best way to alter the rear seat bulkhead for belt and pulley clearance. Pics would be appreciated.
#3
Ginger or Mary Ann?
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Heres mine. Picture isn't very good, appears pee yellow for some reason.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 11:19 AM.
#4
Ginger or Mary Ann?
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
And another..........
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Last edited by US1 Fountain; 12-02-2011 at 11:19 AM.
#5
Registered
Thread Starter
Join Date: Jan 2002
Location: McHenry, IL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks US1. I've enquired with Whipple and they say that I'll need to cut out a triangular area with approx. 1 1/2 " radiused corners. These will go entirely through the fiberglass. I was hoping I could just router out an area similar to yours. If I could just get a CAD file from Whipple and Fountain and see where exactly the interference exists..... I don't think they do things that way in this industry!