Prop question
#1
Registered
Thread Starter
Join Date: Jul 2007
Location: Tonganoxie, KS
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I currently have 24p 3 blade Elite 1 props on boat right now with stock 454's and 1.50 Bravo 1's. My props are an uncomon brand but similar style as Mirage. With these I am seeing right around 4900-5000 rpm. I've been looking for a decent used set of props as mine are both standard rotation. Not sure why the previous owner had them both spinning the same direction.
I just found a pair of 23p Cleaver's (1 standard and 1 counter). I wanting some opinions on how much of a difference this will make in rpm's and top speed if I run these. I know I'd be going down a pitch but depending on which way I spin them I didn't know if I would need to change pitch anyways (either up or down a size).
Any input would be helpfull. Heres a link to the props.. http://midwestboatparty.com/forum/4s...uct=533&cat=11
I just found a pair of 23p Cleaver's (1 standard and 1 counter). I wanting some opinions on how much of a difference this will make in rpm's and top speed if I run these. I know I'd be going down a pitch but depending on which way I spin them I didn't know if I would need to change pitch anyways (either up or down a size).
Any input would be helpfull. Heres a link to the props.. http://midwestboatparty.com/forum/4s...uct=533&cat=11