Merc code reader needed
#1
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Is there a aftermarket reader for merc mefi 1,2,& 3 or do I need to buy a merc tool? does anyone now where to get one?
Larry
Larry
#4
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Thread Starter
#5
Registered
Join Date: Jun 2007
Location: Texas
Posts: 271
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
This is the one I use. http://www.rinda.com/marine/marine.htm
The one on ebay does not have all the conections for what you are wanting to do. You can have it upgraded though.
The one on ebay does not have all the conections for what you are wanting to do. You can have it upgraded though.
#6
Registered
Join Date: Jul 2005
Location: Bahamas
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
DiaCom is by Rinda Tec. . It's a PC software version of the scan tool, but offers more detail. I'm in the Bahamas and there is no import duty on software- I would have to pay 65% duty on the scan tool. I think for basic stuff the scan tool would be better, because you don't have to worry about having your laptop out in the boat.