Temperature / Pressure Senders
#1
Registered
Thread Starter
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
Temperature / Pressure Senders
G'day All,
Is there any difference between the automotive and marine temperature (water / oil) and pressure (oil) sender units for electronic analogue gauges?
I ask because I have the gauges installed (oil & water temp, Oil pressure) but all the senders left with the old motor (454 mag) and I want to be sure I put the right senders in the new engine.
Will the standard automotive style 'universal' senders work or will their sensitivity range be too high?
If they won't work, does anyone have the correct type of senders I should be using and can someone tell me where to get them?
(Open loop cooling system and Gil oil cooler)
Cheers,
John
Is there any difference between the automotive and marine temperature (water / oil) and pressure (oil) sender units for electronic analogue gauges?
I ask because I have the gauges installed (oil & water temp, Oil pressure) but all the senders left with the old motor (454 mag) and I want to be sure I put the right senders in the new engine.
Will the standard automotive style 'universal' senders work or will their sensitivity range be too high?
If they won't work, does anyone have the correct type of senders I should be using and can someone tell me where to get them?
(Open loop cooling system and Gil oil cooler)
Cheers,
John
Last edited by Ghostrider; 03-20-2009 at 05:31 PM.
#2
Banned
Gold Member
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
#3
Registered
Thread Starter
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
I just put a pic up, wow your response was quick!!
I think they're FARIA but the boat's down at my workshop so I can't check!
They look like Faria in the pic!
I think they're FARIA but the boat's down at my workshop so I can't check!
They look like Faria in the pic!
Last edited by Ghostrider; 03-20-2009 at 05:47 PM.
#4
Platinum Member
Platinum Member
Join Date: Oct 2003
Location: Townsville Australia
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
John there Faria.That dash looks familiar.What senders do you have,i can't remember?Any 0-80 PSI oil sender will work from a GM application.Careful with the water because theres 2.The Alarm sender and the one you need.I don't know the range.Search Ebay you're sure to find one.Hows the project?I've finished paint.The whole thing got done.Starting fit out.
#5
Registered
Thread Starter
Join Date: Jul 2008
Location: Darwin, Australia
Posts: 730
Likes: 0
Received 0 Likes
on
0 Posts
John there Faria.That dash looks familiar.What senders do you have,i can't remember?Any 0-80 PSI oil sender will work from a GM application.Careful with the water because theres 2.The Alarm sender and the one you need.I don't know the range.Search Ebay you're sure to find one.Hows the project?I've finished paint.The whole thing got done.Starting fit out.