Valve Covers-Merlin Heads
03-22-2002, 02:47 AM
#1
Registered
Thread Starter
Join Date: Sep 2001
Location: Connecticut
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Valve Covers-Merlin Heads
Trying to find a decent set of Valve covers for Merlin heads. Looked at Eddie Marine, Cp Performance, just did not like the covers. I need covers to clear a Crane Gold Roller set up and need to find with breathers in the covers. Anybody have any suggestions or maybe you have a pair to sell.
Thanks/Sheikman
Thanks/Sheikman
03-22-2002, 08:23 AM
#2
Charter Member #655
Charter Member
your stock covers will work if you cut the drippers off and use double thick gaskets......
__________________
If your boat has a sail do you ride a horse to the ramp?
If your boat has a sail do you ride a horse to the ramp?
03-22-2002, 12:09 PM
#3
Registered
This is KAAMA (using JimV's computer) I have a 2 used pair of 2-piece poished aluminum valve covers for sale with breathers that are tall and will clear roller rockers no problem. $195 per set Mark (KAAMA) 616-291-7932
03-22-2002, 02:26 PM
#4
Charter Member #737
Charter Member
Stock did not work with the Merlin heads. I cut off all the oil drips on mine and even with two thick gaskets the covers where not tall enough. I put on a set of tall stamped steal covers I had sitting around until I find some that I like.
03-22-2002, 02:28 PM
#5
Charter Member #737
Charter Member
Kaama
Can you email a picture of the ones you have? I may be interested in one set.
Rich
Can you email a picture of the ones you have? I may be interested in one set.
Rich
