GPS Speedo Instal
#1
Platinum Member
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Lake St. Clair
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
GPS Speedo Instal
I'm installing an autometer GPS speedo, what is recommended for 12v power source, I was going to use an a hot wire /ignition , or should a have it to a constant hot wire, does the recall clear once you turn the key off? or what is the correct source for power
#3
Banned
Gold Member
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
Should have a wiring diagram. There might be a constant hot. If you do wire it to a switched power source, you will lose your top speed.
If you need literature, email me the part number and I will get you a diagram.
[email protected]
Kirk
If you need literature, email me the part number and I will get you a diagram.
[email protected]
Kirk
#4
Platinum Member
Platinum Member
Thread Starter
Join Date: Sep 2002
Location: Lake St. Clair
Posts: 1,935
Likes: 0
Received 0 Likes
on
0 Posts
I have a wire diagram, it's not real specific, red wire - 12v source, I wired it to the key switch, if it were live 24/7 I think it will run down the battery?