Using Drive Fluid Up
#1
Registered
Thread Starter
Join Date: May 2007
Location: Linwood, Saginaw Bay
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
2008 38 Fountain EC with 496 HO's and Bravo 3's..
I have been monitoring the drive fluid levels all season, and have had to refill the stbd. side three times already. None needed on port. No oil in bilge, no oil slick behind the drives...
No shavings on the lower unit magnets.
...where can it be going?
Carder
I have been monitoring the drive fluid levels all season, and have had to refill the stbd. side three times already. None needed on port. No oil in bilge, no oil slick behind the drives...
No shavings on the lower unit magnets.
...where can it be going?
Carder
#4
Registered
![Default](/forums/images/icons/icon1.gif)
While it's off have it pressure and vacuum tested as well. Could be going past a seal and you will not always notice it as an oil slick.
Last edited by RaggedEdge; 08-03-2009 at 09:05 PM.