Engine mount bracket
#1
Registered
Thread Starter
Join Date: Oct 2005
Location: West Olive, MI
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Who else makes an engine mount bracket for a small block similar to #1 in this picture? The Mercruiser price is hard to stomach. I haven't been able to find them anywhere else.
http://www.mercruiserparts.com/Show_...=Engine+Mounts
Thanks,
Eric
http://www.mercruiserparts.com/Show_...=Engine+Mounts
Thanks,
Eric
#2
Registered
![Default](/forums/images/icons/icon1.gif)
It's the same mount for small blocks and big blocks. I would think you should be able to find a used one. Put a post in the swap shop that you are looking for one.
Eddie
Eddie
#3
Registered
Join Date: Mar 2008
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I just gave a set away. I'll see if i have another in the shop attic - I'll be up there later anyhow. Do you need both top and bottom for one side? two sides? half of each? in the absence of extras upstairs, you can find them on ebay pretty commonly or likely from a local boat salvage mess. just be a little careful, there are a couple of different heights.
addition: ebasicpower has them for under 100 a side... (both top and bottom). they're usually easy to deal with for basic stuff like this.
addition: ebasicpower has them for under 100 a side... (both top and bottom). they're usually easy to deal with for basic stuff like this.
Last edited by wtfo; 09-06-2009 at 08:12 PM.