MACDAD260

BGIII, The guy that fixed my distributor works out of his house. He is the first house west of Homrich on 76th street , near Byron Center. I don't have his phone number handy. I'll try to find it and post it tomorrow. Otherwise you could just go to his place. He is usually there working in the garage next to the house. Doug

BOB ONEIL

Sorry I got to this so late but, The bushings (2) are part number: 23-90915. They are 3.65. You can get them at any Merc. Dealer.

They will probably need to order them for you.

Did mine last year 486 hrs on that motor. The other one was fine.

You should check your intake manifold to make sure the allignment is right.

Bob

BGIII

Did you happen to find his #? Is he on the north side of 76th? Thanks

MACDAD260

I did find his number, finally. It is 616-878-9734. He is on the north side of 76th at 3691. Best time to call is probably 9 to 5. Good luck, Doug

BGIII

Thanks MACDAD, dropped it off yesterday, picked it up tonight. Done.

MACDAD260

That's great, BGIII.

He must have still had the extra bushing that he ordered for mine. He said he ordered two but, only used one of them. Glad you found him OK. Sorry I wasn't able to get the number to you in time to call him. Look forward to meeting you soon! Are you going to Grand Haven this Saturday to watch the poker run? I am going to be there about 9am and go out in the lake so I can watch them take off from the water. It was awesome last year.

See ya, Doug

BGIII

Hope to be out there Friday night & Saturday morning. Boss lives in Grand Haven on the channel so I have a good vantage point for activity in the channel. Boat is not ready yet but soon. Hope to go on one of the fun runs this summer.