Break in oil for stock 7.4 330-350??
#2
speel chekk this fokker!
Charter Member
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 1 Like
on
1 Post
i have heard teh best way to break ina new motor is with light weight valve springs or even a set of old lower ratio rocker arms
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#3
Charter Member
Charter Member
Join Date: Mar 2001
Location: Longview, Wa 98632
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
30 wht. non det. petrolium oil. Break in cam dump oil Refill with same. Run to operating temp and cool completely for about 6 times. This is to allow (work hardening) to pistons which will harden the soft alu of the piston and become harder than before and scrub the rings to the cyl. After that you can go to a better oil
(syn, or petrolium) and hammer down. Good luck. GEO
(syn, or petrolium) and hammer down. Good luck. GEO
Thread
Thread Starter
Forum
Replies
Last Post
onesickpantera
General Boating Discussion
20
04-22-2005 08:40 AM