Omc king cobra
#1
Registered
Thread Starter
Join Date: Jul 2002
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I have a 1989 king cobra (so It says) (twins) how do i properly id the drive there seems to be alot of confusion on the the drive.is it a cobra with king stickers on it? if so can i buy glm parts for it? please help? i have read every thread on king cobras and cant come up with an answer
Thanks in advance
Thanks in advance
#2
Registered
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
I have a 1989 king cobra (so It says) (twins) how do i properly id the drive there seems to be alot of confusion on the the drive.is it a cobra with king stickers on it? if so can i buy glm parts for it? please help? i have read every thread on king cobras and cant come up with an answer
Thanks in advance
Thanks in advance
What is wrong with your drive?
to determine the correct drive i would need a serial # then i could check the fish and see what you have..
Last edited by FIXX; 01-31-2010 at 10:09 PM.
#3
Registered
Thread Starter
Join Date: Jul 2002
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks it has smallblocks and i will look at the transom it is in storage have you tried elimianting the swithces and just kill to shift i had an outboard tha ti use to do that with helped them live alot longer
#4
Registered
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
No i have not elimianting them, their a pain in the AZZ to adjust tho,theirs 2 to those little boogers on each engine and if their not set just rite you will have problems pulling them out of gear,,omc makes special tools to set the cables just rite so they work properly..