exhaust for 741 cam shaft whos running what
#41
Registered
Join Date: Sep 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
![Confused](/forums/images/smilies/confused.gif)
#46
Registered
Join Date: Nov 2001
Location: Pennsylvania
Posts: 3,385
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Why was the cam degreed in at 111* rsstieny? The reason a hotroder might do that is to raise the hp curve. Thats fine on a car that has no water in the exhaust. Not so cool on a boat with wet exhaust. If you can get some exhaust inserts to work you can run it with no issues other than higher max hp rpm. It might perform great in fact.
#47
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Why was the cam degreed in at 111* rsstieny? The reason a hotroder might do that is to raise the hp curve. Thats fine on a car that has no water in the exhaust. Not so cool on a boat with wet exhaust. If you can get some exhaust inserts to work you can run it with no issues other than higher max hp rpm. It might perform great in fact.
Thanks Rick
#48
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Herre is a link to the cam card. http://www.cranecams.com/index.php?s...41&lvl=2&prt=5
You should also make more power in the RPMs need for a boat.
#49
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
X2 and I'm betting you have found the cause of your reversion.
Herre is a link to the cam card. http://www.cranecams.com/index.php?s...41&lvl=2&prt=5
You should also make more power in the RPMs need for a boat.
Herre is a link to the cam card. http://www.cranecams.com/index.php?s...41&lvl=2&prt=5
You should also make more power in the RPMs need for a boat.