BW-C 72 Tranny/cooler line SIZE???
#1
Registered
Thread Starter
BW-C 72 Tranny/cooler line SIZE???
Getting ready to plumb my tranny oil cooler lines. Just wondering what size line would be right for the application. I was thinking -8 AN???? Also roughly how much pressure is typically on these lines?
Thanks,
John
Thanks,
John
Last edited by getrdunn; 04-17-2010 at 11:58 PM.
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
#8 minimum, 10 is better. Normally about 50 psi in those lines, push-lock is fine.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired