502 rebuild
#2
Charter Member
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Yes. all bolts have the same torque. You can use assembly lube or motor oil on the threads.
#4
Registered
![Default](/forums/images/icons/icon1.gif)
The mains torque to 110 with 30 wt motor oil. If you use a moly lube then the torque spec will change. The moly has much less friction, so it will use a much lower torque spec. I don't know what it is. I always use oil and 110.
Torque the heads to 75 ft lbs. Do it in 4 stages.....30, 50, 65, 75 ft lbs from the center out.
Eddie
Torque the heads to 75 ft lbs. Do it in 4 stages.....30, 50, 65, 75 ft lbs from the center out.
Eddie