Alpha One Gen 2 Water Pump Parts
#1
Registered
Thread Starter
Join Date: Jan 2010
Location: Iowa
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I purchased my boat last year and have no idea when the last time the impellar was changed so I'm gonna attempt to do it. Any advice on what to buy? I have found a couple different kits but I'm not sure if they are the same. Is one better than the other?
https://macombmarineparts.com/produc...ducts_id=34755
http://www.macombmarineparts.com/pro...oducts_id/9606
Also is it necessary to get the alignment pins and sterndrive mounting gasket shown on this site?
http://sterndrivetools.com/Replace%2...0Assembly.html
I hate to do this since the drive fluid was just replaced but I don't want this thing going out on me this summer. Any other advice is more than welcome.
https://macombmarineparts.com/produc...ducts_id=34755
http://www.macombmarineparts.com/pro...oducts_id/9606
Also is it necessary to get the alignment pins and sterndrive mounting gasket shown on this site?
http://sterndrivetools.com/Replace%2...0Assembly.html
I hate to do this since the drive fluid was just replaced but I don't want this thing going out on me this summer. Any other advice is more than welcome.
#2
Registered
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
all you need is this kit,the housing on your lower unit is stainless steel and usually never need to be replaced unless its all gouged up inside..
http://www.go2marine.com/product.do?...F&WT.mc_id=gb1
http://www.go2marine.com/product.do?...F&WT.mc_id=gb1