Whats a good Valve Spg. - Rem./Inst. tool
#1
Registered
Thread Starter
Whats a good Valve Spg. - Rem./Inst. tool
Anyone use this one or similar to it. I have always used the old flat bar type ones however at times they hold pressure while backing off the nut. Regardless I am just looking to get a better one.
http://www.summitracing.com/parts/MOR-62370/?rtype=10
Thanks,
John
http://www.summitracing.com/parts/MOR-62370/?rtype=10
Thanks,
John
#3
Registered
i have had that one for over 20 years,still works geat.