bravo 1 hesitation into gear??
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
bravo 1 hesitation into gear??
my one bravo 1 when putting into forward gear had a slight hesitation , then at one point i put it in forward and it did not go in so i pulled it back to reverse and went right in, then back to forwar and not in so i bumped the throttle up to about 1500 and it clunked and went in, ever since it has been working perfect with no issues.
Thanks
Thanks
#3
Registered
Definately cable adjustment. On a stock cable bracket that is bolted to the exhaust riser, its the bottom cable. Break the lock nut loose, and pull the cable out of the bracket. Then you can screw the cable end in or out to adjust. From what your discribing, you have to back the cable end out. Just did this yesterday!
#5
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
Definately cable adjustment. On a stock cable bracket that is bolted to the exhaust riser, its the bottom cable. Break the lock nut loose, and pull the cable out of the bracket. Then you can screw the cable end in or out to adjust. From what your discribing, you have to back the cable end out. Just did this yesterday!