110s K-Planes: Who's running them with indicators?
#1
Registered
Thread Starter
Join Date: Apr 2009
Location: Englewood, OH
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
110s K-Planes: Who's running them with indicators?
I have an older set of 110s Kplanes.. they work great, but have no indicators. Its fine for the most part, but it sure would be nice to add a set to them.. take the guess work out of where they are (I just set them to what feels the best when I use em, but it takes a bit to find the sweet spot)
Anyone running a set of these old things with indicators?
Reason I ask is because I'm curious how the cable had to be ran out the transom with the 110s.
Thanks, guys!
Anyone running a set of these old things with indicators?
Reason I ask is because I'm curious how the cable had to be ran out the transom with the 110s.
Thanks, guys!
#2
Registered
Like you, I've got a pair of 110S K-Planes with no indicators. These tabs don't use cable actuated indicators, but use a linear resistance sender that would operate an electric gauge. Similar in operation to a electric trim gauge and sender. There is a port in the center of the tab assembly's manifold that accepts the sensor(#40) or a block off plug(#41). The sensors, and most other parts, for the 110S tabs are listed NLA on Bam's site.
#3
Registered
Thread Starter
Join Date: Apr 2009
Location: Englewood, OH
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, I know... sucks. They work great, but I was hoping to hear that somone actually rigged some cable indicators on them and see some pics of how they did it.. or if its even possible?
Last edited by ndaniels; 08-22-2010 at 03:03 PM.
#4
Registered
Join Date: Dec 2009
Location: Westville New Jersey
Posts: 86
Likes: 0
Received 0 Likes
on
0 Posts
#5
Registered
Thread Starter
Join Date: Apr 2009
Location: Englewood, OH
Posts: 636
Likes: 0
Received 0 Likes
on
0 Posts