502 Blues
#2
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Join Date: Nov 2008
Location: Bend Oregon
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
What pressure are you running cold? Has it been that way from the get go? Or is it been gradually been getting worse. Just a thought is your remote oil filter plumb correctly? Had a buddy with the same issue, he had the remote filter plumb wrong. It ran fine until it crushed the paper pleats in the filter and he then started to loose oil pressure. His was at the 23 hr mark. Just a thought. Pete
#5
VIP Member
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Join Date: Nov 2008
Location: Bend Oregon
Posts: 503
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Check the routing on the remote fiter. Sounds like they are backwards.. Should be running more pressure than that. Out on the engine (outter fitting on engine adaptor) to in on the filter base. Out of the filter base to the cooler than to the engine in (center fitting on engine adaptor),
#8
Registered
Thread Starter
Join Date: Aug 2009
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Check the routing on the remote fiter. Sounds like they are backwards.. Should be running more pressure than that. Out on the engine (outter fitting on engine adaptor) to in on the filter base. Out of the filter base to the cooler than to the engine in (center fitting on engine adaptor),