BBC help needed
#1
Registered
Thread Starter
Join Date: Oct 2009
Location: Surrey, UK
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hi guys, just had the heads on my 454 machined as they were in a bit of a state and the machinist had to remove 25thou from both intake faces.
Can I get extra thick gaskets to make up the difference or is there another solution to this?
Heads are cast iron Merc alpha oval port if it matters.
Can I get extra thick gaskets to make up the difference or is there another solution to this?
Heads are cast iron Merc alpha oval port if it matters.