mercruiser pulley
#1
Registered
Thread Starter
mercruiser pulley
I need at least one Merc. circ pump pulley for 454. It is part # 19692 3 groove steel apx 7" . I found a replacement from ebasicpower.com, but it is 6" . Does anybody know where to get these from. I can get all the other pulleys from Mercruiserparts.com but this one is not availiable. Around 88 Mercruiser changed their pulleys. The newer arrangement had an aluminum crank pulley, Alum seawater pump pulley, and a 3 groove Circulating pump pulley. I like to use the newer setup because the old steel crank pulleys all rot out. I will be building several motors in the near future and would appreaciate it if I could get any of these pulleys. The crank pulley is # 90081-C. Seawater pump pulley is # 52822-C . Thanks,
Big Block Billy
Big Block Billy
#2
Ginger or Mary Ann?
Charter Member
Did you try pt# 19692P from Mercparts? It still shows good.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#3
Registered
Thread Starter
I tried by motor # and the part showed but was grayed out,
Mercruiserparts showed a price over $300, but it was not currrently avail. Maybe if I use the number in the search I'll have better luck. Thanks, BBB
Mercruiserparts showed a price over $300, but it was not currrently avail. Maybe if I use the number in the search I'll have better luck. Thanks, BBB
#5
Ginger or Mary Ann?
Charter Member
Originally posted by bbb242
I tried by motor # and the part showed but was grayed out,
Mercruiserparts showed a price over $300, but it was not currrently avail. Maybe if I use the number in the search I'll have better luck. Thanks, BBB
I tried by motor # and the part showed but was grayed out,
Mercruiserparts showed a price over $300, but it was not currrently avail. Maybe if I use the number in the search I'll have better luck. Thanks, BBB
Naw, that ain't right. Try again .........Item #14,
http://www.mercruiserparts.com/Show_...ND+FRONT+COVER
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#7
Ginger or Mary Ann?
Charter Member
Your more than welcome.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#8
Guest
Posts: n/a
Just a thought...
I still have my original pulleys for this engine. I took a look at them through the dust to find the following part #'s:
Waterpump: Steel 7"
Sea Water: Alum. 5 5/8" #52822-c
Crank: Alum. 6 3/4" #90081-c
Alternator: Steel 2 3/4" w/ fan
I ended up moving into a set of Alum. last year and couldn't see throwing away anything good.
If you have a contact to get rid of these or a set of manifolds, risers, "Y" pipe, distributor, I would be appreciated. I would like to get them to someone that can use them...
Thanks, Tim
I still have my original pulleys for this engine. I took a look at them through the dust to find the following part #'s:
Waterpump: Steel 7"
Sea Water: Alum. 5 5/8" #52822-c
Crank: Alum. 6 3/4" #90081-c
Alternator: Steel 2 3/4" w/ fan
I ended up moving into a set of Alum. last year and couldn't see throwing away anything good.
If you have a contact to get rid of these or a set of manifolds, risers, "Y" pipe, distributor, I would be appreciated. I would like to get them to someone that can use them...
Thanks, Tim
Thread
Thread Starter
Forum
Replies
Last Post
poolshrk
General Boating Discussion
0
04-06-2008 11:34 AM