I'll ask again(PLEASE HELP!)......
#1
Registered
Thread Starter
Join Date: Aug 2009
Location: CONCORD, CALIF
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
I'll ask again(PLEASE HELP!)......
Can Anyone Recommend A Company That Will Custom Make Me A Set Of Exhaust Tips? I Have All The Specs. Including The Transom Angle. Please Help!
What Are The Best Internal Flappers To Use. Looking For Something That Wont Burn The Rubber Out In 40 Hours And Then Sound Like Pebbles In A Hubcap.
What Are The Best Internal Flappers To Use. Looking For Something That Wont Burn The Rubber Out In 40 Hours And Then Sound Like Pebbles In A Hubcap.
#2
VIP Member
VIP Member
i think corsa would they are located in berea ohio i think ( maybe cleveland )
__________________
www.bajaboatowners.com
www.bajaboatowners.com
#6
Registered
Join Date: Aug 2006
Location: Ontario, OH
Posts: 2,465
Likes: 0
Received 0 Likes
on
0 Posts
You could also use transom rings and flangless tips. That way you don't have to worry about getting the angle on the flange right on.
Personally I like the way the tip 'floats' in the transom rings as opposed to the welded on flange.
Personally I like the way the tip 'floats' in the transom rings as opposed to the welded on flange.
#8
Registered
Cmi
#9
Registered
Thread Starter
Join Date: Aug 2009
Location: CONCORD, CALIF
Posts: 410
Likes: 0
Received 0 Likes
on
0 Posts
tips
Actually, I'm in the process of moving the tips from beneath the water line to above it. I got a reply from Stainless Marine yesterday and they said they'll fab em' up for 130.00 each. That's all the detail I have from them at this point. I don't know if for that price they come with flappers, etc... I would imagine that they polish them when they are done though. I'm gonna have to call these other companies that you guys have recommended.
#10
Registered
Join Date: Aug 2004
Location: Kentucky
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts