454 to Gen VI 502 swap What's involved?
#11
Registered
Thread Starter
Join Date: Jun 2007
Location: Denton, TX
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
What is the difference between the 502 flywheel and the 454 flywheel?
Balance weights? Bolt pattern?
If I understand right, the ring gear is beveled on the backside for a TRS installation......
Greg
Balance weights? Bolt pattern?
If I understand right, the ring gear is beveled on the backside for a TRS installation......
Greg
#12
Registered
![Default](/forums/images/icons/icon1.gif)
http://www.offshoreonly.com/forums/g...-flywheel.html
ps. are you a CE-750 Driver?
![Cool Smiley 011](/forums/images/smilies/cool-smiley-011.gif)
#13
Registered
Thread Starter
Join Date: Jun 2007
Location: Denton, TX
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks for the link. Sounds like I've got some flywheel work to do.
Yes I used to drive a CE-750 for a couple thousand hours..... going a little slower these days, but still burning that kerosene.
Yes I used to drive a CE-750 for a couple thousand hours..... going a little slower these days, but still burning that kerosene.