Cast Aluminum Oil Pans Kiekaefer?

Reply Subscribe

Thread Tools

05-13-2002, 07:48 PM

MrCIG

Charter Member#330

Charter Member

Thread Starter

Join Date: Oct 2000

Location: CHICAGO, IL

Posts: 2,377

Likes: 0

Received 6 Likes on 6 Posts

Cast Aluminum Oil Pans Kiekaefer?

I have big cast Aluminum oil pans with a "K" on the side, I believe they are Kiekaefer (spelling) there is a big removable plate on the bottom with the drain plug in it. My engine builder took the plates off and now I need new gaskets. Does anyone know where to get gaskets for the plate. Or do we have to make them?

Thanks
Mark

__________________
If you like it rough do it OFFSHORE!!!

05-13-2002, 09:40 PM

BLOWN 1100

Registered

Join Date: Jan 2001

Location: WEATHERFORD,TX,USA

Posts: 208

Likes: 0

Received 0 Likes on 0 Posts

Save time and make them, they should not be that
hard.
Loy

05-13-2002, 10:06 PM

Mbam

Offshoreonly Advertiser

Join Date: Mar 2001

Location: Pompano Beach FL, USA

Posts: 2,420

Likes: 6

Received 164 Likes on 92 Posts

We use Dow Corning 732 silicone. In fact, we use it instead of a pan gasket too.

__________________
Marc

www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired

05-14-2002, 05:33 PM

MrCIG

Charter Member#330

Charter Member

Thread Starter

Join Date: Oct 2000

Location: CHICAGO, IL

Posts: 2,377

Likes: 0

Received 6 Likes on 6 Posts

Thanks for the input. I will probably do the silicone.

Marc, How is that Cigarette project comming along?

Mark

__________________
If you like it rough do it OFFSHORE!!!

05-14-2002, 08:05 PM

Mbam

Offshoreonly Advertiser

Join Date: Mar 2001

Location: Pompano Beach FL, USA

Posts: 2,420

Likes: 6

Received 164 Likes on 92 Posts

Slooooooooooooooooooooooooooow

__________________
Marc

www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired

05-14-2002, 11:29 PM

Intolerant1

Guest

Posts: n/a

The best sealant I have found for this type of application is made by Toyota. Its real pricey unless you know someone at a dealership. I'm down to my last tube or I would let you have one.
Toyota part number 00295-00102.