Water Pressure Relief Needed?
#1
Registered
Thread Starter
Join Date: Dec 2006
Location: Merritt Island, FL
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Water Pressure Relief Needed?
Hi everyone, happy thanksgiving.
Based on my setup, do I need to plumb in a water pressure relief valve and dump?
1985 Mistress, mild 468's, original pickups (aluminum casting with a "grate" that hangs down an inch or so off the transom). I'm using crossovers and Stainless Marine manifolds.
It's a pretty heavy setup and I'm not planning any more power for a long while. Just trying to keep it simple and get it wet ASAP.
Many thanks, Randy
Based on my setup, do I need to plumb in a water pressure relief valve and dump?
1985 Mistress, mild 468's, original pickups (aluminum casting with a "grate" that hangs down an inch or so off the transom). I'm using crossovers and Stainless Marine manifolds.
It's a pretty heavy setup and I'm not planning any more power for a long while. Just trying to keep it simple and get it wet ASAP.
Many thanks, Randy
#4
Registered
Thread Starter
Join Date: Dec 2006
Location: Merritt Island, FL
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
I can post a pic later this week. It's definitely "re-shape-able".
Thanks for your help.
#5
Registered User
Gold Member
Join Date: Apr 2007
Location: prince george,va
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
like elitemarine.get a gage on it and check it out.your pressure should be some where around 12-25 pounds depending on your setup.i am sure someone else will chime in.