K-Plane Bushing Question
#1
Registered
Thread Starter
K-Plane Bushing Question
I pulled my 280 K-planes off to get re-powdercoated and had to destroy the single rubber bushing on the rear shaft. I can't seem to find this part online. Did Mercruiser switch to 2 bushings with a spacer like parts 20 and 22 in the pic? I just want to make sure those will fit.
#3
Offshoreonly Advertiser
Offshoreonly Advertiser
Ken has it right, the early tabs used a piece of hose. The newer have trim ram style bushings.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#5
Offshoreonly Advertiser
Offshoreonly Advertiser
No, sorry
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#6
Registered
Join Date: Mar 2006
Location: Lake George NY
Posts: 432
Likes: 0
Received 0 Likes
on
0 Posts