502 casting
#21
Registered
Thread Starter
Join Date: Dec 2009
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
ok I have another short block to check out. here are the numbers. 10237300 I looked it up and and it shows a gen 6- 4 bolt main. I will send fixx a pic as soon as I get it.
Last edited by toolsinbox; 02-19-2011 at 06:09 PM.
#22
#23
Registered
Thread Starter
Join Date: Dec 2009
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
I sent pic to mrfixx
engine says crusader in crome valve covers hang on I will upload to photobucket so all can see. here is the link let me know what you think
http://i874.photobucket.com/albums/a.../502engine.jpg
engine says crusader in crome valve covers hang on I will upload to photobucket so all can see. here is the link let me know what you think
http://i874.photobucket.com/albums/a.../502engine.jpg
Last edited by toolsinbox; 02-20-2011 at 09:15 PM.
#24
Registered
Thread Starter
Join Date: Dec 2009
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Any reason to stay away from a tall deck 454? it has a single piece rear main seal. What are the pros and cons please. I am interested if there are any limitations to this type of block.
casting number. 10114182
casting number. 10114182
Last edited by toolsinbox; 03-01-2011 at 07:59 PM.