hydraulic steering helm-char lynn #?
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
i need to make sure i am looking at the correct helm for my setup. i have a latham ram, 7/8 with 8" stroke. i think i need a char lynn 211-1007-002. ideally i would like to be around 2.5-3 lock to lock if possible but i am not picky
#3
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
the part number isnt exactly typical, for exzmple the 211-1007 that i am looking for is a open center, 3/4 port and 4.5 placement while the 1009 has 7.3. if i used the 1009 i would have like 1.5 turns lock to lock. how much are you willing to sell yours for?
#4
Registered
![Default](/forums/images/icons/icon1.gif)
211-1007 That is a 75cc helm which is the typical size that Imco sells for their single cylinder steering.
HC-1 page 106
http://www.imcomarine.com/nvcatalog/imco_2009.pdf
HC-1 page 106
http://www.imcomarine.com/nvcatalog/imco_2009.pdf
#8
Registered
Join Date: Aug 2006
Location: Ontario, OH
Posts: 2,465
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Sorry...by typical I meant what is typically used in a boat for full hydro, at least what I've seen in the past. ![Big Grin](/forums/images/smilies/biggrin.gif)
I forget what I paid for it, I'll go $200 out the door for it.
![Big Grin](/forums/images/smilies/biggrin.gif)
I forget what I paid for it, I'll go $200 out the door for it.