guesses on power?
#11
Registered
Join Date: May 2010
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
I will get you the cam numbers out of my old 572 made 720 and great torgue. I can't remember the numbers off the top of my head. But a set of big Merlin heads at least 345's would make a bigger diff and you can find pretty cheap used.
#12
Registered
240 248 dur 621 632 lift on a 112 lsa will work better,, get a swap cam on the firing order.. good for 25-30 HP over the 741 also if you ever put some good heads on youll probably gain another 100HP
#13
Registered
Thread Starter
To be honest i had my AFR's on this set up -- diff cam-- and was making over 700 at 5200 rpm. I had these iron heads, and was hoping to make them work for now...
I'd like to use the afr's on a blower combo.
I'd like to use the afr's on a blower combo.
#15
Registered
Thread Starter
thinking about --- i'm going to just leave it as is -- it won't be that much difference for the time being
Thanks for all the responses.
Dave
Thanks for all the responses.
Dave