Merctrans, I am in need of one
#1
Guest
Posts: n/a
Merctrans, I am in need of one
I finally blewup the tranny in my 24 Excalibur, and need a replacement. It is a Merctrans. (I cannot fit a borg, as the boat has a 502 with a blower and their is not enough room).
THanks for any help
Rob
please e-mail me at [email protected]
THanks for any help
Rob
please e-mail me at [email protected]
#2
Charter Member#330
Charter Member
Call Triplex Marine @708-849-2200 ask for Todd or Larry I believe he has a couple for sale.
They are located in Illinois I don't know where you are since you didn't fill out your profile
Mark
They are located in Illinois I don't know where you are since you didn't fill out your profile
Mark
__________________
If you like it rough do it OFFSHORE!!!
If you like it rough do it OFFSHORE!!!
#3
Charter Member #232
Charter Member
Just have it rebuilt. It is such a simple trans. You can still get the seal kit from Merc and the clutches are just Ford AOD clutch disks. Same clutches that they use in the BW drive. Get the Brass clutches they will hold more HP, and if you hit something or get them wet they fair better. Hubber told me as long as it does not need a pump that he charges 600 bucks to put them together, and another 100 bucks to put in an additional clutch in the drum. Your other alternative is to go with a Stelling Box for 2200 bucks and put a bravo on there. You should be able to sell all your TRS drive stuff for about 3 grand and come out of it all ok.
__________________
Put your best foot forward!
Put your best foot forward!
Thread
Thread Starter
Forum
Replies
Last Post
WHITE-DIAMONDS
General Boating Discussion
5
05-16-2003 11:59 AM