V6 ign module questions?????
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
I have a pair of 671 blower motors in my Cig and I am using the V6 modules. I have the timing set at 30 deg total. Even though the modules allow for 14 deg of advance,it seems to be much shorter than that. I checked it at 1200 rpm and the timing was 22 deg. It is a little tough to start when hot.
I thought I had read something on this before.
Kurt.
I thought I had read something on this before.
Kurt.
#2
Offshoreonly Advertiser
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Kurt, at 1200 RPM some of the advance is aready in. Because it is an 8 instead of a 6 the module thinks it is 1600 RPM. Check it while cranking or at 500 rpm
(hard to do)or so. What gauge battery cables do you have?
![Big Grin](/forums/images/smilies/biggrin.gif)
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired