What's faster?
#1
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
For a lower unit finish, which is the fastest? Polished, gloss paint, or buffed primer? I kinda suspect the answer, but I want to hear what other people know (or think they know
)
![Big Grin](/forums/images/smilies/biggrin.gif)
#2
Ginger or Mary Ann?
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I guess a slightly rough lower unit. Going on the same theory as the sanded hull bottoms.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
#3
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
In theory, a slightly rough surface is better for reduced drag.
A smooth finish will allow [mostly]uninterupted laminar flow and induce direct water-to-solid friction. A slightly sanded or rough surface will 'hold' or grip some degree or water, a microscopic boundary layer, and create water-to-water friction -- the latter being less.
A smooth finish will allow [mostly]uninterupted laminar flow and induce direct water-to-solid friction. A slightly sanded or rough surface will 'hold' or grip some degree or water, a microscopic boundary layer, and create water-to-water friction -- the latter being less.
![Cool](/forums/images/smilies/cool.gif)
#4
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Yea, it was my understanding that the buffed primer was the fastest. The question is by how much?
#5
Charter Member #38
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Wrightstown,WI,USA
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
So if you go with a slightly rough finish wouldn't you lose some prop efficiency ? You're introducing air to the prop/blade ?! I think it's going to be a very similar to nose coning a drive(you want to keep as much of an uninterrupted flow of water to the prop as you can) ?!
#6
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Actually, I believe the smooth polished surfaces are "sticky".
#7
Charter Member #38
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: Wrightstown,WI,USA
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I think the differences would be so minor. Probably not even noticeable. Just like some prop shops will polish a prop and some won't both claim their way to be better ? Can they prove it ? Usually not. I think it's mostly just eye candy.
Now if you were going for a world record maybe a few tenths would be worth it.
On the nosecone issue, don't they usually want to smooth out the water before it gets to the prop ? With a rougher finish you'd be disturbing this water ? Which is correct ?!
Test is the only way and then it would have to be identical conditions(temps , water , fuel , weight etc.)
It's hard to say. I'm sure if you made calls to the manufacturers each would claim theirs to be faster ???
Now if you were going for a world record maybe a few tenths would be worth it.
On the nosecone issue, don't they usually want to smooth out the water before it gets to the prop ? With a rougher finish you'd be disturbing this water ? Which is correct ?!
Test is the only way and then it would have to be identical conditions(temps , water , fuel , weight etc.)
It's hard to say. I'm sure if you made calls to the manufacturers each would claim theirs to be faster ???
#9
Official OSO boat whore
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Mequon, WI
Posts: 6,157
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Play along Gary, because I'm thinking gloss black.
![Frown](/forums/images/smilies/frown.gif)