Need ignition help
06-11-2002, 05:05 PM
#12
Registered
Thread Starter
Join Date: Oct 2000
Location: Sacramento, CA, USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Well, it died again. I put a new coil on it, but still no spark out the coil. The module must be bad in my opinion. I'm going to order a new HEI setup from Davis. ANy bad news about these? By the way thanks for the help.
06-11-2002, 06:21 PM
#13
Registered
Steve,
I installed the D.U.I ignition system in my boat this spring, works great!
I have a couple of friends that have them as well and it is definetly the most bang "spark" for the buck.
It is a very clean setup, two wires purple ignition / gray tach and you are up and running. No more spegetti messy wiring harnesses.
I installed the D.U.I ignition system in my boat this spring, works great!
I have a couple of friends that have them as well and it is definetly the most bang "spark" for the buck.
It is a very clean setup, two wires purple ignition / gray tach and you are up and running. No more spegetti messy wiring harnesses.
06-11-2002, 08:12 PM
#14
Registered
Thread Starter
Join Date: Oct 2000
Location: Sacramento, CA, USA
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
My thoughts exactly, plus parts are cheaper and more reliable. The whole setup is about $10 more than the module. I believe simple is always the best.
