Engine rotation
#11
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
If the intake is aluminum, then it's a 365hp 454 with rect port heads and forged bottom end.
If the intake is cast iron, then it's a 330hp 454 with oval port heads and cast bottom end.
That LOOKS like a GM aluminum medium rise dual plane intake (which is the 365hp Mag).
The cast iron intake was a bit "lower".
Shame the other motor is missing if it's a 454Mag/365.
They are good platforms for inexpensive hopups.
MC
If the intake is cast iron, then it's a 330hp 454 with oval port heads and cast bottom end.
That LOOKS like a GM aluminum medium rise dual plane intake (which is the 365hp Mag).
The cast iron intake was a bit "lower".
Shame the other motor is missing if it's a 454Mag/365.
They are good platforms for inexpensive hopups.
MC