total advance
#1
Guest
Posts: n/a
![Default](/forums/images/icons/icon1.gif)
running a 468 ci chevy w/ tunnel ram and two 660 Holleys,a big cam etc. Idles at 1400rpms and my total advance of 36 deg comes in at 1500. Engine is up and down 200 rpms from 3800 to 5500 consistently. Engine feels like it is pegging a rev limiter and its got me puzzled. if this makes any sense give me some ideas.
#2
Charter Member #355
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Join Date: Oct 2000
Location: North Texas!
Posts: 434
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Id say that with a tunnel ram intake and two carbs on a naturally aspirated 468 inch motor with a big cam that your not making much torque and all the horsepower is going to be above 6000rpm. A setup like that needs to breath and it won't until rpm is up.
My .02, Eric
My .02, Eric
__________________
Boatless in Texas......for now
Boatless in Texas......for now
#3
Registered
![Default](/forums/images/icons/icon1.gif)
What are the cam numbers and what compression? I run my 13:1 compression 496 38 degrees locked in. It runs great and pulls real hard from 3500 to 6000. I run 6100 to 6300 at WOT. I am running a solid roller. Give more of the particulars on the motor combo. My rev limiter is set at 6800 rpm. You need to let that baby sing to take advantage of the tunnel ram and cam.
Thread
Thread Starter
Forum
Replies
Last Post
rob 221 lib man
Fiberglass and Paint
7
08-09-2007 10:43 PM