TomR

KC,
I thought they were close, but didn't actually make contact.

onesloryd

TomR
Remember that when you change the lifters and cam for that matter you should also adjust your pushrod length to keep proper valve train geometry.

TomR

onesloyrd,
Good point, already on it, I will switch the pushrods back to the ones comp sent with the cam and lifters, they are a little longer.

KCHOTBOAT

Mine did and when I called comp they where of no help. I did use the comp push rods that came in the kit.

TomR

I was going to put them in tonight, I'll double check each one to make sure.