B&M 250 rebuilds??
#1
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, VA
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
B&M 250 rebuilds??
I have a B&M 250 that is throwing lube out the front "nose" where the upper pulley attaches. I've never opened one up before - are there seals/bearings that can be replaced at home, or do I need to send it off to a blower shop?
Thx - Steve
Thx - Steve
#5
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, VA
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
I did the tear down tonight and it looks like it is just the front seal. I'm going to a friends house tomorrow night and press the bearing & shaft out. Should be easy enough to fix myself, so I'll order the parts from The Blower Shop.
Thanks for the help..
Thanks for the help..
#8
Charter Member #232
Charter Member
It was a Superboat. However you waited so damn long that now I have a Formula and I guess that is the flag of choice
__________________
Put your best foot forward!
Put your best foot forward!
#10
Charter Member
Charter Member
Thread Starter
Join Date: Oct 2000
Location: Richmond, VA
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
hi-perf, you're right on target. The pulley was groved too. Bad seal + groved pulley = hatch full of gear lube.
What causes the groves?
What causes the groves?