power trim guage
#1
Registered
Thread Starter
Join Date: Jan 2012
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
the needle on the power trim guage sometimes takes a few moments before it actually moves. it also has a tendency to bounce around and seems to hang up in one spot. meanwhile the bravo drive moves smoothly up and down. the trim sensors were brand new late last season. could it just be that the guage needs to be replaced?
Last edited by bobhoffmann; 05-19-2013 at 07:36 PM.
#2
Registered
Join Date: May 2013
Location: tiverton ri
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
not a 100% but its either the gauge or im not sure the correct term for them but i know one the alpha out drives theres 2 trim sensors on either side were it pivots my last boat the gauge didnt work at all an that was the problem but im sure someone with more experience will chime in