water intake routing
#1
Registered
Thread Starter
Join Date: Oct 2000
Location: PA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
water intake routing
any suggestions on routing the main water intakes into the crossovers as not to kink them or to interfere with belts ?
such as preformed hoses or elbows in the hoses i have now ?
chris
such as preformed hoses or elbows in the hoses i have now ?
chris
#2
~~~~
Charter Member
CB, you 've got to be creative. I just did a reroute on my Activator and it took about 3 trips to the auto parts store and some 1.25" hose fittings along with the old hoses. I was cutting hoses and piecing together this and that and finally came up with an interesting setup that goes around the front of the motor for easy access. I was moving my oil cooler to install an oil thermostat and that's what prompted all of the work. Good Luck.
#4
Ginger or Mary Ann?
Charter Member
Our Napa dealer has a cataloge that shows a pic and overall hose length of all the hoses available. I have gone that route many times looking for a hose that had the needed bends that was close enough to work w/o having to use multiple elbows. Just a suggestion.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Thread
Thread Starter
Forum
Replies
Last Post
Waterfoul
General Boating Discussion
4
04-17-2003 08:01 PM