Cutting a Bravo Lower (indexing the sections)
#2
Registered
Thread Starter
Join Date: Nov 2000
Location: Norfolk, VA.
Posts: 103
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
The two sections together with the jig. I tacked them in place today. Chris from Sterndrive Specialties is sending me a lower gear-set, so I can check the shimming and back-lash. I think the only way to really tell if the gears are mating properly is with marking dye and do a visual check.
Last edited by Maxx; 08-17-2002 at 08:39 PM.