Comp cams 212 Timing cover
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
![Picard1](/forums/images/smilies/more/picard1.gif)
Problem is, its hitting the cover, the legs that go to the block. It says in the destructions to grind the pump to make room. Has anyone else had this problem? I installed the supplied allen bolts that make room for the bolt clearance problem, but the outlets dont mate up to the block anyways.
![](http://static.summitracing.com/global/images/prod/large/cca-212_w.jpg)
#2
Registered
![Default](/forums/images/icons/icon1.gif)
but the outlets dont mate up to the block anyways.
#3
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
It was out maybe .030". I took care of it with my angle grinder and a tiger paw. 2 or 3 test fits and it was good. I had a problem with the cam button retainer also. Took care of that with a 1/4" drill and file.